Printing with Gcodes

Currently print models that supports Gcodes:

Cetus MK1, MK2, MK3

UP mini 2, UP mini 1, UP plus 2

UP BOX, UP BOX+

Printers that do not support Gcodes yet:

X5, UP300, UP mini2 ES

for the list of supported Gcodes:

• G0:linear Move
• G4: Dwell
• G28: Move to Origin (Home)
• G90: Set to Absolute Positioning
• G91: Set to Relative Positioning
• G92: Set Position, only support A axis reset.
• M0: Stop or Unconditional stop
• M1: Sleep or Conditional stop
• M2: Program End
• M25: Pause SD print
• M42: Switch I/O pin
• M73: Set build percentage
• M80: ATX Power On
• M81: ATX Power Off
• M82: Set extruder to absolute mode
• M83: Set extruder to relative mode
• M92: Set axis_steps_per_unit
• M104: Set Extruder Temperature
• M109: Set Extruder Temperature and Wait, Example M109 S215
• M140: Set Bed Temperature (Fast)
• M141: Set Chamber Temperature (Fast)
• M190:等待tem床温度达到目标p
• M191: Wait for chamber temperature to reach target temp
• M204: Set default acceleration
• M206: Offset axes

Reference:

https://forum.tiertime.com/t/howto-cura-w-cetus3d/824

https://forum.tiertime.com/t/config-for-cetus3d-mkii-in-slic3r/1007

https://forum.tiertime.com/t/simplify3d-profile/472